Are Cracks in Concrete Normal? - An Expert's Perspective
Cracks in concrete are common but often misunderstood. Learn what causes them and how you can prevent them from getting worse with
Read guide →Fix cracks, level your slab, and test for moisture before installing laundry cabinets, avoid costly damage with this step-by-step concrete floor prep guide.
Installing cabinetry on a concrete slab sounds straightforward, until the doors won't close, the carcasses rock, or moisture silently destroys the joinery from below. This guide walks through every floor preparation step you need to get right before a single cabinet touches the ground.
If you've ever requested a quote for custom laundry cabinets and been surprised when the installer starts asking about your floor rather than your storage needs, you're not alone. It feels like an odd detour, but experienced cabinet makers know that the slab underneath is what determines whether a beautiful fitout stays beautiful five years from now.
Unlike a timber subfloor, which has some natural give, a concrete slab is unforgiving. Any variation in level, any crack that shifts seasonally, or any moisture migrating up through the pour will be transferred directly into the cabinet structure sitting on top of it. Cabinet boxes, whether flat-pack, modular, or fully custom laundry cabinets built to your exact dimensions, are engineered to sit plumb and square. Think of them a little like a row of lockers: the entire run depends on each unit being correctly aligned for doors, drawers, and joins to work properly.
Here is what a concrete slab problem actually does to a cabinet installation:
A good cabinet maker asks about your floor because fixing it after the cabinets are in costs far more than fixing it beforehand. The sections that follow show you exactly how to do that.
Before any custom laundry cabinets are measured, priced, or ordered, the concrete slab beneath them deserves a proper once-over. Cabinet makers ask about the floor for good reason, a slab that looks flat to the naked eye can hide level variations, active cracks, and soft spots that will cause expensive problems once cabinetry is installed and loaded with weight.
Not every crack in a concrete slab is a crisis, but some demand attention before any fitting work begins. Walk the floor slowly and look for:
Press a screwdriver tip firmly along any crack. If the edges crumble or flex, the concrete is compromised and needs repair before cabinet installation proceeds.
A long spirit level, ideally 1.8 metres or longer, is the right tool here. Lay it across the floor in multiple directions, particularly along the wall line where your cabinetry will sit. A tolerance of roughly 3mm over 1.8 metres is the practical threshold; anything beyond that will create visible gaps under cabinet plinths and make plumb installation genuinely difficult.
Use a pencil to mark any low spots or high ridges. Photograph them. This documentation becomes useful when discussing the job with your cabinet installer, and it tells you exactly where grinding or levelling compound will be needed before any fit-out begins.
Once you've identified cracks, dips, and moisture issues, it's time to get the slab ready. Custom laundry cabinets are only as good as the surface beneath them, a floor that rocks, slopes, or crumbles will transfer every fault directly into your cabinetry, causing doors to bind, drawers to stick, and toe-kicks to gap unevenly. Here's how to tackle the most common problems before your cabinet maker arrives with a tape measure.
Hairline and narrow cracks should be cleaned out with a wire brush or angle grinder, then filled with a flexible polyurethane or epoxy crack filler suited to the crack width. Wider structural cracks deserve more attention: our guide on how to repair fine cracks in concrete walks through the method in detail, and the broader cracks category covers everything from shrinkage cracks to settlement damage. Allow all fillers to cure fully, rushing this step is one of the most common installation mistakes.
For floors that are out of level by more than about 3 mm over a 1.8 m span, a self-levelling compound (SLC) is the most reliable fix. Key steps include:
Minor high spots can be ground back with a diamond cup wheel. Once the floor is flat, solid, and dry, your custom laundry cabinet installation can proceed on a foundation that will actually hold.
You've patched the cracks, shimmed the high spots, and the slab looks ready. But before any cabinetry goes near that floor, there's one more test that most homeowners never think to do, and it's the one that can unravel a brand-new installation within months. Moisture vapour transmission through concrete is invisible, odourless, and relentless, and it's exactly why experienced suppliers of custom-built laundry cabinetry will ask about your slab's moisture readings before they finalise a quote.
Concrete is porous by nature. Even a slab that was poured decades ago can draw groundwater upward through capillary action, particularly in laundry rooms and garages where drainage is nearby and soil moisture is rarely constant. That vapour migrates upward, and when it meets a cabinet base, adhesive, or particleboard carcass, it creates the perfect conditions for swelling, delamination, and mould growth.
If either test flags a problem, the fix usually involves a penetrating concrete sealer or an epoxy moisture-barrier coating applied before installation. Skipping this step to save a weekend is a false economy, replacement cabinetry costs far more than a $40 test kit and an afternoon's prep work.
All the planning that goes into choosing custom laundry cabinets (the door profiles, the internal fittings, the bench heights) can be undone in an afternoon if the concrete floor beneath them hasn't been properly prepared. Cabinet makers ask about your floor before they measure for exactly this reason: a slab that is cracked, damp, or out of level creates problems that no amount of skilled joinery can fully compensate for.
Before your installer arrives, the slab should meet three basic conditions:
When those three boxes are ticked, cabinet installation becomes straightforward. Toe kicks sit flush, doors hang true, and drawers glide without binding. Adjustable legs, standard on most flat-pack and custom floor cabinets alike, can handle minor remaining variation, but they are a fine-tuning tool, not a fix for a fundamentally uneven or crumbling base.
There is also a longer-term financial argument for getting the concrete right first. Custom laundry cabinetry represents a meaningful investment, with fitted packages commonly ranging from a few hundred dollars for basic flat-pack through to several thousand for fully custom joinery. Spending comparatively little on crack repair, self-levelling compound, and a reliable moisture barrier protects that investment for the life of the installation.
Every section of this article has pointed toward the same conclusion: the floor is not an afterthought. Concrete repair is the first trade on the job, and when it is done properly (cracks filled, level confirmed, moisture controlled) everything that follows, from cabinetry to appliances to finished flooring, sits on a foundation that will not let it down.
Get straightforward repair tips and the occasional new guide. Join the newsletter.